Neptune Settings
These commands are available three ways — in the FREE-WILi GUI app, in a serial terminal, and on the device itself. See Connecting it to a computer for how to reach them.
CAN1 Mode
CAN Type or UART over CAN PHY
How to use it — press a.
What you enter — value.
CAN1 Rate
Baudrate of CAN or UART over CAN PHY
How to use it — press b.
What you enter — value.
CAN1 FD D Rate
Baud Rate for CANFD Data section
How to use it — press c.
What you enter — value.
CAN1 Listen Only
Enables Listen Only mode
How to use it — press y.
CAN1 Tx Retry
CAN Transmit retry options
How to use it — press e.
What you enter — value.
CAN1 Cust Baud
Hex Value String for Register C1NBTCFG. Blank to disable.
How to use it — press f.
What you enter — value.
CAN1 Cust Data Baud
Hex Value String for Register C1DBTCFG
How to use it — press g.
What you enter — value.
CAN1 Termination
Enables termination for network.
How to use it — press 1.
CAN1 API Enabled
Set Wili API Base ID
How to use it — press i.
CAN API ID
Enables Terminal over CANFD
How to use it — press j.
What you enter — value.
CAN2 Mode
CAN Type or UART over CAN PHY
How to use it — press k.
What you enter — value.
CAN2 Rate
Baudrate of CAN or UART over CAN PHY
How to use it — press l.
What you enter — value.
CAN2 FD D Rate
Baud Rate for CANFD Data section
How to use it — press m.
What you enter — value.
CAN2 Listen Only
Enables Listen Only mode
How to use it — press n.
CAN2 Tx Retry
CAN Transmit retry options
How to use it — press o.
What you enter — value.
CAN2 Cust Baud
Hex Value String for Register C1NBTCFG. Blank to disable.
How to use it — press p.
What you enter — value.
CAN2 Cust Data Baud
Hex Value String for Register C1DBTCFG
How to use it — press r.
What you enter — value.
CAN2 Termination
Enables termination for network.
How to use it — press s.
CAN2 API Enabled
Enables Wili API over CANFD
How to use it — press t.
LIN Master En
Enables LIN Master Pull Resistor
How to use it — press u.
LIN Baud Rate
Baud Rate for LIN
How to use it — press v.
What you enter — value.
Analog In En
Enables analog input measurement
How to use it — press x.