Main Menu Commands

Commands are a single letter. After you enter the letter additonal information is entered. The following command are available from the main menu:

Command	Description	Arguments	Notes
h	set io high	gpio number
l	set io low	gpio number
o	generate pwm	gpio number, frequency, and duty cycle
g	get all io		Returns the state of all 32 IO of the FREE-WILi processor in hex
s	read/write spi	the spi write bytes	Returns the read bytes in hex
t	write radio	the radio index, and data in hex
k	read radio	the radio index and count of read	Returns the data read
i	write i2c	device address, register, and additional write bytes
r	read i2c	device address, register and read length	Returns the data read
p	poll i2c		Returns a table of i2c address that responded to a read
u	write uart	write bytes in hex
y	stream uart		toggles on and off of sending uart data to host
w	run script	name of script in file system
m	load fpga from file	name of fpga bit file in file systems
d	download fpga	fpga bit file bytes	send raw FPGA bits after this command. This has a 10 second timeout.
x	files		Access the files menu
z	settings		Access the settings menu